球探网比分直播

Exhaust steam recovery device

Overview

The SVFQ series exhaust steam recovery device is a high-tech energy-saving and environmentally-friendly product developed by our company's scientific researchers based on the vapor-liquid two-phase flow, liquid-liquid two-phase flow, and Venturi principle, using our company's unique pump cavitation elimination device . The exhaust steam of most industrial and mining enterprises has not been recycled, and was exhausted into the air, causing unnecessary waste of heat and water resources. The main reason for the lack of recycling of exhaust steam is the low or no pressure of the exhaust steam. Recycling will affect the normal operation of production steam equipment. Our company implemented Venturi principle to recover the exhausted steam without pressure, solved this problem, saved energy and water resources, realized energy cascade utilization, made the energy recovery and utilization rate reach above 97%, and reduced environmental thermal pollution. And noise, improving the scene environment. Our company's SVFQ series exhaust steam recovery device implements mechatronics design, compact structure, small footprint, simple and fast installation, and easy maintenance. It also uses an automatic supercharger and an energy-saving fast exhaust device to ensure that the SVFQ series exhaust steam recovery device can run under various exhaust steam conditions at the customer site, achieving safety, stability, reliability, high efficiency, energy saving, and water saving. Noise reduction is a real energy-saving and environmentally friendly high-tech product.

Many companies using steam as power or thermal energy want to recover the exhaust steam with latent heat of vaporization, clean and high quality, and avoid waste of water and energy. However, the exhaust steam has low or no pressure, which makes it difficult to recover exhaust steam. It may affect the normal operation of the steam equipment. Our company's SVFQ series exhaust steam recovery device solves the technical problems of low pressure recovery and even pressureless recovery of exhaust steam. The upper part of the company's SVFQ series exhaust steam recovery device is equipped with a water film former. The desalinated water is sucked by the anti-cavitation high temperature water pump. After passing through the venturi device, it is divided into two paths and sent to the water film former all the way to form a fine, uniform The water film and water film spray absorb the waste steam waste heat, and then it is sucked by the venturi device. After mixing with the desalinated water, part of it is sent to the user or the waste heat recovery system, and part of it is returned to the water film former of the waste steam recovery device for recycling. .

Physical map of exhaust steam recovery device

Features

The company's SVFQ series exhaust steam recovery device is a new type of high-efficiency energy-saving equipment, which completely solves the problem of low-pressure or no-pressure recovery of exhaust steam, improves the utilization rate of water and heat energy, and saves energy. Now it is widely used in petroleum, chemical industry, metallurgy, machinery, light industry, food, medicine, electric power, painting, heating and other industrial sectors. It is used in large, medium and small power plants across the country and has received good economic benefits and Social benefits. Compared with other existing products of the same type, this product also has the following advantages:

Selection

The company's SVFQ series exhaust steam recovery device can be carefully designed according to the specific parameters of the customer's exhaust steam and the special requirements of the steam equipment. Only when the product matches the specific parameters of the exhaust steam of the customer and the special requirements of the steam equipment can a better exhaust steam be obtained. Recycling effect, which not only meets customers' requirements for exhaust steam recovery, but also is economical, reasonable and reliable. Therefore, customers must provide the following information when ordering SVFQ series exhaust steam recovery devices:

Related Products and Services

【 product list】

Steam condensate recovery series
Steam condensate recovery device
Pneumatic Condensate Recovery Pump
Condensate recovery system without trap
Hydrophobic automatic pressure device
Flash tank
Double barrel siphon type condensate water recovery machine
Steam recovery machine
Condensate recovery auxiliary equipment
Low-level thermal deaerator series
Low-level thermal deaerator
Headless deaerator
Exhaust steam recovery device
Condensate fine treatment series
Condensate removal of iron
Condensate deconductivity
Boiler waste heat recovery series
Boiler waste heat recovery device
Boiler flue gas waste heat recovery device
Boiler continuous blowdown expansion vessel
Boiler regular blowdown and expansion container
Heat exchanger series
Corrugated plate heat exchanger
Bellows heat exchanger
Double-tube heat exchanger
Floating coil / semi-heatable heat exchanger
Efficient intelligent heat exchange unit
Positive displacement heat exchanger
Softened water series
Automatic softened water system
Automatic dosing device
Reverse osmosis system
Ion exchanger
Multi-media filter
Activated carbon filter

个省市地区设有办事处,全年365天, With offices in 20+ provinces and cities nationwide, 365 days a year,
小时提供服务, 2小时内作出响应, 1天内到达现场。 Provide service 24 hours, respond within 2 hours, and arrive at the scene within 1 day.

[Contact your local office +]